How To Remove Bathroom Tile - Best Ways For Removing Tiles From Bathroom

2020/2/3 15:06:33

The bathroom is an important area of our house, but with the passage of time, there will be some problems with the floor/wall tiles in the bathroom, or some people want to renovate the tiles in the toilet, then we need to remove the tiles in toilet. How to remove bathroom tiles? What should we pay attention to in the process of demolition? Follow this guide you can find some bathroom tiles removal methods.

Best Tools For Removing Bathroom Tile Flooring/Wall

You can buy a floor scraper, a broom-size tool with an angled steel head used to strip off layers of flooring material. Often, the tool is useful for dislodging the flooring material from the adhesive. We recommend using the following tools and safety equipment for tile removal projects:

Floor Scraper
Handheld Chisel
Paint Scraper
Safety Glasses
High Quality Riggers / Leather Gloves
Dust Mask
Drop Sheet

Bathroom Tiles Removal Guide - How To Remove Tiles From Bathroom

Preparation Before Construction

Before the official start-up of bathroom tile knocking, some preparations need to be done, including the construction of power settings and the preparation of construction tools. In the process of bathroom renovation, in order to prevent accidents such as electric shock and short circuit. The temporary power required for the renovation must be from the living room to the bathroom. Percussion drill is an important tool for breaking wall tiles.

Remove Bathroom Appliances

Remove appliances in the bathroom, such as wash basin, mirror, hook, water heater, etc., and finally remove the ceiling. The toilet fixtures can be removed evenly before the tiles hit all the walls. Not all sanitary wares need to be dismantled immediately, and the toilet can be dismantled after knocking tiles. In order to avoid falling tiles when knocking tiles, the drain pipe is damaged, or falling into the drain pipe causes scaling.

Remove Bathroom Tiles

Wall tiles can be removed after the toilet fixture has been removed. The removal is usually from the bottom of the wall to the top, from the edge of the tile to the interior, and also according to the location of the removal to choose the appropriate impact strength. Tap the tiles from the bottom of the wall and from the edge of each tile. If you touch the tiles above, the floor will accumulate more tiles, blocking the tiles under the wall, which is not conducive to disassembly. In addition, in the process of removing bathroom tiles, it is necessary to clean the tiles on the floor to avoid excessive accumulation of tiles, slow down the construction progress and cause construction accidents.

Pay attention to the treatment of waterproof layer when knocking tiles. The old waterproof layer is usually not broken down. After knocking tiles, the original waterproof layer is thinner. Make a layer of waterproof, improve the waterproof ability of the toilet/shower.

Clean Up The Construction Site

It is very important to clean the construction site. After the completion of construction, the construction site will be cleaned immediately, and the scattered tiles and cement on the site need to be cleaned.